High Carbon Iron Filamet 0.5kg Once fired in a kiln

Once fired in a kiln

6mm or larger* Filawarmer* Blue painters tape for your print bed

Try hanging the filament spool just above the printer

Used with Steel Blend for Stainless Steel 316L

What you'll need to print

High Carbon Iron Filamet 0.5kg Once fired in a kilnHigh Carbon Iron Filamet contains around 80% metal and enables any FFM Printer to produce metal objects. This filament is highly ferromagnetic both before and after sintering. 1. 75mm What you'll need to print; FDM FFF Printer Hardened Steel Nozzle 0. 8mm or 1. 0mm Blue painters tape for your print bed. What you'll need to debind and sinter; Sintering parameters for this material are currently in development Slicer Setup: Start with a basic PLA